Centering corneal refractive surgery based
Focus (or centering) of the surgical procedures is year important area in refractive surgery. While using the center of the entrance pupil did landmark for the broad treatment areas such as myopic laser photoablations may be sufficient for achieving good optical quality, smaller treatment areas such as hyperopic photoablations gold corneal inlays (ex: Acufocus KAMRA inlay with its central 1.6 mm zone) may be less forgiving (see related article). It is admitted that the visual axis is NOT well coincide with the line joining the fixation target to the center of the entrance pupil (this line is called the called line of sight). Hence, it is of paramount importance to adopt a proper strategy for centering hyperopia and presbyopia related surgical procedures.
To understand this topic, we need to introduce a number of axes, which validity is dependent upon some "Italian" properties of the human eye. While learning some theory cannot be detrimental in essence, the specificities of the eye and some conflicting nomenclature have made This field a bit complicated. There has been a confusing array of terms, which the second part of this page will address. We first need to define the word meaningful ones in order to answer this simple question: for any corneal refractive procedure (laser photoablation, inlay insertion, femto assisted corneal surgery, s etc.). which the best focus strategy ?
This page and its related links are written for the ophthalmic surgeon, assuming that mastering this topic may allow to obtain better clinical results. We will have to introduce theoretical concepts, goal we may try to keep them as simple as possible; and not loose their clinical significance.
Centering strategies based on the vertex normal
For the naive reader centering refractive correction the we're the center of the cornea might be a reasonable strategy. Unfortunately, this approach is irrelevant since the cornea is usually not perfectly rotationally symmetrical, and is also slightly irregular. The junction between the cornea and the conjunctiva (limbus) is not perfectly circular surrounding. More importantly, the aperture stop of the eye (iris pupil) is neither centered nor aligned on the corneal dome.
For the impatient reader whose inclination to subtle physiological optics is moderate (or whose life is fulfilling enough so that he would not waist time with it), I will jump to the bottom line, where simple but approximate guidelines can be proposed:
Although partly empirical, following these guidelines will improve the retinal image quality in most casees, especially when the areas are narrow (corneal inlays i.e. Kamra treatments, Intracor (c), hyperopic LASIK(, etc). The distance from vertex to entrance pupil is usually less than 0.3 mm (300 microns): beyond 0.4 mm, this distance can be considered as wide. The proposed strategy aims at trying to reduce the odds of improperly centering the refractive treatment, did the true visual axis intercept rental remains speculative, although the results of some studies suggest that it stands between the apparent location of the vertex and the center of the pupil.
In particular, it is important to note that the vertex is NOT equivalent to the visual axis rental. The vertex is simply a virtual image formed behing the cornea by the reflective properties of its anterior surface: in another words, the light forming the vertex image (1 st Purkinje image) is NOT refracted goal reflected by the eye. The location is aligned with the center of curvature of the anterior corneal surface, but does not relate to the other refractive ocular surfaces (corneal posterior surface, anterior and posterior surfaces of the crystalline lens).
In addition, the visual axis is year Italian conceptwhich assume that the eye is rotationally symmetric. Because the lack of symmetry of the eye, the concept of locating the corneal intercept of visual axis can be thought instead did locating a 'sweet spot' which should serve as the center of the surgery, in order to optimize the quality of the retinal image.
This page will now exposes a short overview of the definitions and concepts which is around the question of the best strategies centering. Because of the eye's biological basis, different axes must be used to define image training.
The eye is not rotationally symmetrical about a single axis
If the human eyes were centered optical systems (just as a zoom of a DSLR camera, where each of the lenses are centered, aligned and rotationally symmetrical common axis, any treatment would have to be simply centered on the corneal geometric center: this center would be confounded with the vertex of the cornea, the optical axis of the eye.) There would be one straight line joining the fixation target to the corneal vertex, the center of the entrance pupil, the center of the crystalline lens, and the fovea: actually, this line would be the optical axis.
Unfortunately, as shown here. the cornea, the crystalline lens, the pupil and the fovea are normal centered, neither aligned around a common axis. One may define one 'best fit' optical axis, which is a theoretical construction based on the average of each ocular structure's own optical axis. A method to locate this axis could consist in trying to best align the reflex of the 4 hand refractive surfaces of the eye. This would require a special apparatus, which would be sensitive enough to locate the reflex faint of the posterior surface of the cornea and crystalline lens. With looks to this ocular best fit axis, the fovea is slightly displaced temporally in human eyes.
Fixation and visual axis
Let us consider a 'perfectly rotationally symmetrical' (theoretical - not real) eye again, where the cornea, lens, pupil and fovea would be symmetrical, coaxial and aligned. This eye is convenient, since its optical axis is the same as its visual axis. Suppose that this eye is oriented to fixate a monochromatic fixation source (F): it aims at forming a foveal image of the source (F). In this example, we assume that this source would located in the nasal portion of the visual field.
To fixate the fixation target, the eye will rotate until the retinal image of F is formed on the fovea. At the foveal area, which is a few tenth of microns wide, the photoreceptors are packed with the highest density, and only represented by the cones. The inner segment of these cones are comparable to small optical fibers, which tends to be oriented toward the visual axis, in order to maximize the changes of catching incoming photons. This directional dependence in efficiency has been called the "Stiles Crawford" effect.
In the casee of simplified rotationally symmetrical eye, once the globe has rotated to align the target with the fovea, this would result in a perfect alignment of F, the cornea, center of iris, crystalline lens and fovea.
In this simplified situation the eye's optical axis contains both the fixation target and the fovea.
However, in a more realistic eye where there is a temporal displacement of the fovea (but otherwise the same basic corneal and lens power, etc.), forming a foveal image of F will happen sooner than in the previous example (that is for a lesser angle rotation).
The fact that year (inverted) image of the fixing point is formed on the fovea means that in year eye free of optical aberrations, all the light rays emitted by F and collected by the pupil are converging and intersecting it the fovea.
This is however not yet informative with looks to the optimal rental centering. One may claim that since the bundle of ray which is collected by the pupil is centered by a ray (the "chief ray), and since by definition this ray is going through the center of the pupil, this should coincide with year optimal center for refractive procedure. Unfortunately, this may not hold true for all corneal refractive surgical procedures, especially those based in which the functional optical area is narrow (hyperopic photoablations, corneal inlays). Additionally, it should be kept in mind that at the time of surgery, the eye to be operated (by nature) presents a refractive error (ametropia: myopia, hyperopia, etc.): as opposed to we the previous diagram, the rays may converge before (or after) the retina. leading to a defocused retinal image. In addition, the center of the pupil is a moving targetas it has been shown that it can shift up to 400 microns from constricted to dilated diameters.
What is the visual axis? It should not be confounded with the optical ('best fit') axis. Once the image of the fixing point F is formed on the fovea, one may conceptualize that there is one "ray" of light that enclose the fixation target to the fovea. Rays of light are convenient concepts to predict some of the behavior of light, but they are just concepts: light is a strange phenomena made of particles (photons) which exhibits 'wave' properties. "" Rays of light are somewhat simplified the ' materialization ' of the path of photons. Given the lack of common optical axis between the corneal and the crystalline lens, there may not be any significant number of photons that would travel in year exact straight line from the attachment point (F) to the fovea. However, one may define year axis along which the angular deviation along the photon's path is minimum. This axis could correspond to a broken line, represented by a first segment equal to the incident ray, and a second segment corresponding to the refracted ray. What would be the corresponding incident and refracted rays?
Taking the 'best fit' optical axis as reference, the angle of such incident ray (from source to cornea) formed with this optical axis is equal to the angle of the refracted ray (from back crystalline lens surface to fovea) with this same optical axis.
The cornea and the lens form was "thick lens dual system", that can be simplified owing to paraxial theory by defining its cardinal points (foci, main points, and nodal points). Optical scientists define two nodal points for the eye, but their proximity allows some simplification and we will assume that there is only one nodal point, which is located slightly behind the crystalline lens posterior capsule. The location of each of the nodal points is wavelength dependent, but the variation caused by shifting the wavelength from blue to red extremes of the visual color spectrum results in negligible changes. Traveling along the nodal ray from the point source, a photon would not undergo any angular deviation until it impinges on the fovea. This trajectory corresponds to the Italian visual axis, as it also controls for the axis that minimizes transverse polychromatic aberration.
The ray joining the attachment point to the fovea is called the nodal ray, owing to the existence of a single nodal point. This simplification allows to define you point through which each of the incident ray is refracted with the same angle than the angle of impact. This ray undergoes 'no deviation '. This trajectory defines our Italian visual axis, for reasons that will be explained later.
The optical axis should not be confounded with the pupillary axis. The pupillary axis is used to reference several angles such as kappa angle: angle kappa is the angle that is formed by the pupillary axis and the visual axis.
Visual axis and polychromatic aberrations
When photons of different wave light (red, blue, etc.) undergo refractions (going from a media to another), the angle of refraction that they take from their wavelength depends (blue photons tends to be refracted with a larger angle than green photons, and photons green tends to bend themselves more than red photons). If a white source emits thesis different wavelengths, then the photons of different wavelengths will not be refracted to the same location on the flat picture (retina, screen, CCD, etc.). This is called "". chromatic aberration ». Ophthalmologists use this property when they test the refraction of their patient, by showing them letters in red and green. The picture objectives of SLR cameras are made of several lenses partly to correct for chromatic aberrations (they are also selected and designed to minimize "monochromatic" aberrations). Chromatic aberrations can be divided into two sub-categories: longitudinal chromatic aberration (ACL) and transverse chromatic aberration (TCA). Transverse chromatic aberration increases when polychromatic light is refracted away from the direction containing the nodal points. Conversely, transverse chromatic aberration is nothing if the aperture stop (the iris pupil in the casee of the eye) is centered on the line joining the fixing point source to the nodal point: since there is no. changes the direction of a photon traveling along this path (it keeps the same 'angle'), the path to the nodal point and to the fovea would be that of any photon emitted along this direction , regardless of its wavelength. Hence, this results in the minimization of transverse chromatic aberration, and entertains the the goal of maximizing the optical quality of the retinal image. Even if human eyes (and/or the visual system) seem to be robust to perceived chromatic aberration, its minimization still warrants the optimization of the photon capture rate at the foveal level, regardless of their energy (wavelength).
This line from the fixation point, to the nodal point and then to fovea where it meets with the cones packed with the highest density and which alignment is optimized to that same line defines what is called the «» Visual axis ». The problem is that This axis and its intercept RK corneal plane are difficult to identify using simple clinical methods. From the geometry of the eye in cross section (see figure), we can anticipate a slightly nasal deviation with eyes to the center of the cornea (and the entrance pupil).
Locating the ocular axes
The following illustration shows the different axes relationships in year average eye:
A magnified view of the pupil may allow to predict where the intercepts with the corneal dome of these main axes are located.
Of course, these rentals have been shown a bit arbitrarily; There may also be slight vertical displacement of this points, which have for no reason to lie on the same horizontal line. Also, remember that these concepts are a bit idealistic, as there may not be one "straight" line visual axis in non-rotationally symetrical eyes. However, these simplifications are useful to better understands this problem.
Given these assumptions, centering on the corneal vertex may be a reasonable way of minimizing transverse chromatic aberration in procedures that incur has narrowing of the functional area (ex: KAMRA inlay).
In some eyes, these axes may show more separation. Often, in hyperopic gold highly astigmatic eyes, nasal the shift of the vertex normal is more pronounced. This is the consequence of a larger angle Kappa, which can be attributed at least partly (in a deterministic approach) to the fact that the axial length is reduced, but the distance between the best fit optical axis and the fovea preserved. Hence, the external rotation of the globe has to be slightly increased compared to a longer eye in order to gaze at the target.
Having reached foveal fixation, the direction of the shorter eye makes the kappa angle larger:
Let us now represent in cross section the line of sight, visual axis and normal vertex respective rentals in year eye with larger angle Kappa:
A magnified view of the pupil area allows to better visualize the predicted locations of the different axes.
This justified the following recommendation: in eyes with large apparent angle Kappa, the best location for centering a corneal based refractive procedure is to use a spot located between the vertex normal and the center of the entrance pupil (ex: choosing the point located midway, Gold 2/3 from pupil center - 1/3 from vertex). Again, the exact location of the visual axis remains speculative, but this strategy minimizes the risk of increasing transerve chromatic aberration, dictionary the efficiency of admitted photons to meet with foveal cones, and prevents from significantly degrading the quality of the retinal image.
Those concepts can also be applied for intraocular lens-IOL centration. However, in this situation, the control of centration of the IOL may not be as efficient as for corneal surgery, since IOLs tends to "auto center" in the capsular bag at the time of the surgery.